AV Equipment Utilization Rate: How to Calculate It and What to Do With the Number
How to calculate time and dollar utilization for AV rental gear, with copyable formulas, a worked example, common mistakes, and buy, sub-rent or sell rules.
Equipment utilization is two numbers, not one. Time utilization is the days an item was out on rent divided by the days you owned it and could have rented it. Dollar utilization (also called financial utilization) is the rental revenue an item earned in a period divided by what you originally paid for it. Calculate both for every item type, over a full year, with the same rules each time. Time utilization tells you whether you have too many or too few units. Dollar utilization tells you whether the money tied up in them is earning its keep. Neither number means much alone, and we found no published benchmark for AV rental fleets, so the useful comparison is your own inventory against itself.
This article touches on depreciation and book cost in places. It is general information, not tax or accounting advice. Every figure in the worked example is hypothetical and labelled that way.
What Is Equipment Utilization Rate?
It is a measure of how much of your owned inventory is working. The general equipment rental industry uses two standard versions, and the definitions transfer to audio, video and lighting gear.
In 2011 the American Rental Association (ARA) published a white paper called ARA Rental Market Metrics. According to Rental Equipment Register’s report at the time, it set out industry standards for the definition of a day, original equipment cost, time utilization, financial utilization, fleet age and period-over-period rate change. Lift and Access used the paired names: time (physical) and financial (dollar) utilization. We could not read the white paper itself. A 2012 column in Canadian Rental Service described it as available only to association members, so the definitions below come from public company filings that use the same terms.
Three terms do most of the work:
- Original equipment cost (OEC). What you paid for the asset. Herc Holdings, a general equipment rental company, defines OEC as the cost of the asset when it was first purchased plus additional capitalized refurbishment costs, based on ARA guidelines. It is not book value and not replacement cost.
- Time utilization. The share of available time an asset spent on rent.
- Dollar utilization. Rental revenue as a share of OEC.
How Do You Calculate Time Utilization?
Divide the time on rent by the time owned.
United Rentals, another general equipment rental company, puts it this way in its 2025 annual report: time utilization is calculated by dividing the amount of time an asset is on rent by the amount of time the asset has been owned during the year. The denominator is time owned, so an item you bought in September has about four months of available days this year, not twelve.
For an AV shop, that becomes:
Time utilization = unit-days on rent / unit-days owned in the period
A unit-day is one unit for one day. Twenty-four speakers owned all year give you 24 x 365 = 8,760 unit-days. If those speakers spent a combined 1,752 unit-days out on paying jobs, time utilization is 1,752 / 8,760 = 20.0%.
Two choices you have to make and write down:
- What counts as a day on rent. We suggest calendar days the unit is committed to a paying job, from the day it leaves the shelf for that job to the day it is back and available. Do not use the billed day count from the invoice. If you bill a seven day rental as three day rates, the unit was still gone for seven days. Our guide to pricing AV equipment rentals covers those multipliers.
- How to roll items up into a fleet number. You can weight by units or by cost, and the answers differ. H&E Equipment Services, a heavy equipment rental company, reported both in its annual report for 2014: time utilization of approximately 72.2% as a percentage of original equipment cost, and 66.9% based on the number of rental units available for rent. Same fleet, same year, two figures more than five points apart. Those are heavy equipment numbers, not AV norms. The weighting method changes the answer, so pick one and label it.
How Do You Calculate Dollar Utilization?
Divide rental revenue by original cost.
Herc Holdings defines dollar utilization as rental revenue (excluding re-rent, delivery, pick-up and other ancillary revenue) divided by the average OEC of the equipment fleet for the relevant time period. H&E’s 2014 annual report used nearly the same wording: annual rental revenues divided by the average original rental fleet equipment costs.
For an AV shop:
Dollar utilization = equipment rental revenue from owned gear / average original cost of that gear
Three details carry over from those definitions:
- Revenue means equipment rental revenue on gear you own. Leave out labor, delivery, consumables, damage charges and sub-rented lines (the “re-rent” in Herc’s definition). Sub-rented gear earned its revenue on someone else’s cost.
- Use revenue after discounts. The number should reflect what the item actually earned, not list price.
- Use average cost when the fleet changed. If you owned $60,000 of a category in January and $100,000 by December, dividing a full year of revenue by the year-end figure understates the result. A simple average of month-end cost is good enough.
Dollar utilization also gives a quick payback read. At 50%, an item’s rental revenue equals its original cost in two years (100 / 50). That is revenue, not profit, so real payback is longer.
What Formulas Can You Copy?
Per item type, for one period:
Unit-days owned = sum of days each unit was owned in the period
Unit-days on rent = sum of calendar days each unit was committed to a paying job
Time utilization = Unit-days on rent / Unit-days owned
Average original cost = average of month-end original cost for the period
Dollar utilization = Owned-gear rental revenue / Average original cost
Revenue per rented day = Owned-gear rental revenue / Unit-days on rent
Years to recover cost = 1 / Dollar utilization (revenue only, before owning costs)
Fleet roll-ups:
Fleet time utilization, unit-weighted = total Unit-days on rent / total Unit-days owned
Fleet time utilization, cost-weighted = sum(Original cost x Time utilization) / total Original cost
Fleet dollar utilization = total Owned-gear rental revenue / total Average original cost
How the two connect, for a full year:
Dollar utilization = Time utilization x (Revenue per rented day / Cost per unit) x 365
If you measure a quarter or a month, say so next to the number. A dollar utilization figure for one quarter is roughly a quarter of the annual figure unless you annualize it, so label which one you are showing.
What Does a Worked Example Look Like?
This example is hypothetical. The company, item list, costs, days and revenue are invented for illustration. They are not market data, benchmarks or recommendations.
A small AV company owned the same inventory for all 365 days of the year, with no purchases or sales. Revenue is equipment rental revenue on owned gear after discounts.
| Item type | Units | Cost per unit | Original cost | Unit-days owned | Unit-days on rent | Rental revenue |
|---|---|---|---|---|---|---|
| Powered speakers | 24 | $1,000 | $24,000 | 8,760 | 1,752 | $31,500 |
| Wireless mic systems | 16 | $1,500 | $24,000 | 5,840 | 1,460 | $36,500 |
| Digital audio consoles | 2 | $12,000 | $24,000 | 730 | 146 | $26,000 |
| Laser projectors | 4 | $20,000 | $80,000 | 1,460 | 219 | $66,000 |
| LED wall panels | 120 | $1,000 | $120,000 | 43,800 | 4,380 | $61,200 |
| Moving head fixtures | 24 | $2,500 | $60,000 | 8,760 | 2,628 | $63,000 |
| Truss sections | 40 | $400 | $16,000 | 14,600 | 5,110 | $10,400 |
| Camera chains | 2 | $25,000 | $50,000 | 730 | 51 | $9,000 |
| Total | 232 | $398,000 | 84,680 | 15,746 | $303,600 |
Hypothetical inputs. Original cost is units x cost per unit. Unit-days owned is units x 365.
The arithmetic for each row:
| Item type | Time utilization | Dollar utilization | Years to recover cost from revenue |
|---|---|---|---|
| Powered speakers | 1,752 / 8,760 = 20.0% | $31,500 / $24,000 = 131.3% | 0.76 |
| Wireless mic systems | 1,460 / 5,840 = 25.0% | $36,500 / $24,000 = 152.1% | 0.66 |
| Digital audio consoles | 146 / 730 = 20.0% | $26,000 / $24,000 = 108.3% | 0.92 |
| Laser projectors | 219 / 1,460 = 15.0% | $66,000 / $80,000 = 82.5% | 1.21 |
| LED wall panels | 4,380 / 43,800 = 10.0% | $61,200 / $120,000 = 51.0% | 1.96 |
| Moving head fixtures | 2,628 / 8,760 = 30.0% | $63,000 / $60,000 = 105.0% | 0.95 |
| Truss sections | 5,110 / 14,600 = 35.0% | $10,400 / $16,000 = 65.0% | 1.54 |
| Camera chains | 51 / 730 = 7.0% | $9,000 / $50,000 = 18.0% | 5.56 |
Derived by us from the hypothetical inputs. Years to recover cost is original cost divided by annual rental revenue, before any owning costs.
Fleet roll-ups
- Unit-weighted time utilization: 15,746 / 84,680 = 18.6%
- Cost-weighted time utilization: 16.8%. Multiply each row’s original cost by its time utilization and add the results: $4,800 + $6,000 + $4,800 + $12,000 + $12,000 + $18,000 + $5,600 + $3,493 = $66,693. Then $66,693 / $398,000 = 16.8%.
- Fleet dollar utilization: $303,600 / $398,000 = 76.3%
The two time figures differ by almost two points on the same data. The cost-weighted figure is lower because the most expensive categories here (LED panels, projectors, camera chains) are the least busy, while cheap truss is the busiest.
Why Do Time and Dollar Utilization Disagree?
Because one counts days and the other counts money. Look at three rows.
Truss has the highest time utilization in the example (35.0%) and a below-average dollar utilization (65.0%). It is out constantly and earns about $2.04 per unit per rented day ($10,400 / 5,110).
Wireless mic systems are out less often (25.0%) and have the highest dollar utilization (152.1%). Each rented day brings in $25.00 on a $1,500 unit. Check it with the connecting formula: 0.25 x ($25 / $1,500) x 365 = 1.521.
Camera chains are low on both: 7.0% and 18.0%. At that rate revenue takes more than five and a half years to equal the purchase price.
Read together, the pair sorts inventory into four groups:
| Time utilization | Dollar utilization | What it usually means | First question to ask |
|---|---|---|---|
| High | High | Working hard and paying well | Are you running short on peak dates? |
| High | Low | Busy but cheap | Is the rate too low, or is it discounted or bundled away? |
| Low | High | Rents rarely, pays well when it does | Is it a specialty item that wins jobs? Probably fine. |
| Low | Low | Idle capital | Should you still own it? |
“High” and “low” here mean relative to the rest of your own list.
What Is a Good Utilization Rate for AV Equipment?
We did not find a published, methodologically documented utilization benchmark for AV rental inventory, so we are not giving one. The figures we did find in writing for AV came from vendor blogs with no stated method, and we left them out.
Public filings from general and heavy equipment rental companies do report these metrics, and they show how the numbers are presented. H&E Equipment Services (heavy equipment) reported dollar utilization of 35.8% for 2014, alongside the two time utilization figures quoted earlier, in its Form 10-K.
Do not carry those over to an AV shop. Those fleets are different equipment, rented to different customers on different terms (Herc’s annual report describes renting on a daily, weekly or monthly basis), and nothing in the filings says the results apply to event gear.
Compare each item type with the others, with itself a year earlier, and with its own cost of ownership (covered in the decision section below).
Measure over a full year where you can. If your calendar has busy and quiet seasons, a single month can make a healthy category look dead. Rental companies in other sectors report the same pattern: Herc’s 2025 annual report describes its business as seasonal, with demand tending to be lower in the winter months.
What Mistakes Distort the Number?
Counting billed days, or ignoring prep and transit days. Use days out, not invoice day counts, as described above. Then decide how to treat turnaround. Gear is unavailable while it is being pulled, tested, loaded, trucked and checked back in. Suppose the two consoles in the example went out on 40 jobs, each needing one prep day and one return day on top of the rented days. That is 80 more unit-days of commitment: (146 + 80) / 730 = 31.0%, not 20.0%. Report “on rent” and “committed” as separate lines. A consistent pull sheet process gives you the out and back dates to do this.
Leaving repair days in the denominator without saying so. If the four projectors spent a combined 60 unit-days at the repair bench, the utilization of rentable days is 219 / (1,460 minus 60) = 15.6%, against 15.0% of owned days. Use owned days for the capital question and rentable days for the scheduling question, and track out-of-service days as their own number.
Counting lost or retired units as available. A missing unit is a loss, not idle inventory, and it drags the category down until someone removes it from the count. Our guide to reducing equipment loss covers finding those gaps.
Mixing kits and components. If a speaker package rents as one line, the speakers, stands and cables inside it can show zero days and zero revenue even though they were out. Track days at the component level, then split the kit’s revenue across its components by list price. A hypothetical kit that bills $100 a day, built from components with list prices of $80 and $45, allocates as $100 x 80 / 125 = $64 and $100 x 45 / 125 = $36.
Including sub-rented gear. Revenue from cross-rented items inflates dollar utilization for a category you may be short on. Keep it out of the numerator and track it separately for the buy decision.
Using book value or replacement cost as the denominator. Dollar utilization on depreciated book value rises as the book value falls, even if the item earns the same or less, which makes old gear look better than it is. Use original cost and keep it fixed.
How Does Utilization Drive Buy, Sub-Rent and Sell Decisions?
Utilization tells you where to look. The decision comes from putting it next to two more numbers: what it costs you per year to own a unit, and what it costs per day to borrow one. All figures below are hypothetical placeholders.
The owning cost per year is book depreciation plus repairs, insurance, storage and prep labor. Our article on AV equipment depreciation explains how to set the depreciation part with your accountant. Divide the annual owning cost by the daily sub-rental price to get a break-even number of days.
When should you buy more?
When you are short on enough days to clear the break-even, not when the average looks high.
The wireless mic systems in the example average 25.0%. Suppose that on 30 days of the year all 16 were out and you sub-rented 6 more, for 180 unit-days at $20 a day: $3,600. Suppose one more owned unit costs $450 a year to own. Break-even is $450 / $20 = 22.5 days per added unit. Six more units would each have worked 30 days, which clears it. Owning them costs 6 x $450 = $2,700 a year against $3,600 of sub-rental.
Notice what happens to the metric. With 22 units, unit-days owned rises to 22 x 365 = 8,030, unit-days on rent rises to 1,460 + 180 = 1,640, and time utilization falls to 1,640 / 8,030 = 20.4%. Utilization went down and the business is better off. A falling percentage is not automatically bad news.
When should you sub-rent instead?
When the shortage is real but thin. If the same 180 unit-days came from one large job that needed 60 extra units for 3 days, sixty new units would each work 3 days against a 22.5 day break-even. Sub-rent that job and keep the fleet where it is.
When should you sell?
When an item is low on both measures and nothing strategic explains it.
The camera chains earned $9,000 on $50,000 of original cost. Suppose book depreciation is straight line over five years with no salvage value: $10,000 a year. Rental revenue does not cover depreciation, before repairs, insurance or storage. Now suppose you could sub-rent a camera chain for $120 a day. The same 51 rented days would cost 51 x $120 = $6,120 and still bring in $9,000, leaving $2,880 with no capital tied up.
Check three things before selling:
- Does it win jobs? An item that rarely rents but is the reason a client books the whole show is earning more than its own line shows.
- Can you actually sub-rent it on the dates you need, near you, at that price?
- What will it sell for? Selling depreciated gear can also have tax consequences, which our depreciation article walks through. Ask your CPA first.
How does fleet age fit in?
Track age next to utilization. Fleet age was one of the metrics in the ARA white paper, and public rental companies report it: Herc’s 2025 annual report gives an average fleet age of 45 months at year end and notes that as rental equipment ages, maintenance costs and the risk of equipment being out of service generally increase. That is a general equipment fleet, not an AV one, but the habit transfers: record every unit’s in-service date and watch out-of-service days by age.
What Records Do You Need to Calculate It?
For each unit or item type: purchase cost, in-service date, the out and back dates of every job, the revenue on its quote lines after discounts, days out of service, and the date and reason it left the fleet. If you have those, both utilization numbers are a pivot table.
Check the dates first. A quote says what was sold; it does not always say when each unit left and returned. Scanning gear out and in closes that gap, and our AV equipment tracking guide covers tagging and asset records. If you are evaluating AV rental software, bring last year’s numbers for two or three item types and check that the reports match what you calculate by hand.
Start with your ten highest-cost item types, calculate both numbers for the last twelve months, and sort by dollar utilization.
Frequently Asked Questions
What is the formula for equipment utilization rate?
Time utilization is the number of days an item was on rent divided by the number of days it was owned in the period. Dollar utilization is the rental revenue the item earned in the period divided by its original cost. Track both, because one measures how busy the gear is and the other measures what it earns relative to what it cost.
What is the difference between time utilization and dollar utilization?
Time utilization counts days: how much of the available time an item spent on rent. Dollar utilization counts money: rental revenue as a percentage of original equipment cost. An inexpensive item can be out constantly and earn little, and an expensive specialty item can rent rarely and still pay for itself, so the two numbers often disagree.
What is a good utilization rate for AV rental equipment?
We did not find a published benchmark for AV rental fleets with a documented method, so there is no reliable outside number to aim for. Figures reported by general and heavy equipment rental companies describe different equipment and rental patterns and should not be used as AV targets. Compare each item type with the rest of your own inventory, with its own prior year, and with what it costs you to own.
What does OEC mean in equipment rental?
OEC stands for original equipment cost. One public rental company defines it, following American Rental Association guidelines, as the cost of the asset when first purchased plus additional capitalized refurbishment costs. It is the denominator in the public definitions of dollar utilization we read, and it is useful because it stays fixed, unlike book value, which falls every year as the asset depreciates.
How does utilization tell you when to buy instead of sub-rent?
Divide the yearly cost of owning one more unit by the daily price of sub-renting one to get a break-even number of days. If you would have used an additional unit on more days than that, buying is cheaper, and if the shortage is concentrated in a few large jobs, sub-renting is cheaper. The average utilization of the category does not answer this; the count of days you were short does.
Sources
All pages retrieved November 2026.
- Rental Equipment Register, “ARA Publishes Whitepaper Defining Rental Market Performance Metrics” (September 28, 2011; lists the metrics the ARA white paper standardizes): https://www.rermag.com/news-analysis/headline-news/article/20941493/ara-publishes-whitepaper-defining-rental-market-performance-metrics
- Lift and Access, “ARA Introduces Rental Industry Performance Standards” (September 29, 2011; time (physical) and financial (dollar) utilization naming): https://www.liftandaccess.com/news/ara-introduces-rental-industry-performance-standards
- Canadian Rental Service, “CRA President’s Message: April 2012” (white paper availability to members): https://www.canadianrentalservice.com/cra-presidents-message-april-2012-2553/
- United Rentals, Inc., Form 10-K for the fiscal year ended December 31, 2025 (Item 1, definition of time utilization), US Securities and Exchange Commission: https://www.sec.gov/Archives/edgar/data/1067701/000106770126000007/uri-20251231.htm
- Herc Holdings Inc., “Herc Holdings Reports First Quarter 2025 Results and Affirms 2025 Full Year Guidance” (April 22, 2025; definitions of OEC and dollar utilization), US Securities and Exchange Commission: https://www.sec.gov/Archives/edgar/data/1364479/000136447925000026/herc2025q1-pressrelease.htm
- Herc Holdings Inc., Form 10-K for the fiscal year ended December 31, 2025 (Item 1, rental terms, average fleet age and seasonality; risk factors, fleet aging): https://s25.q4cdn.com/161720633/files/doc_financials/2025/q4/Herc-2025-Form-10-K-Final.pdf
- H&E Equipment Services, Inc., Form 10-K for the fiscal year ended December 31, 2014 (Item 7, time utilization on two bases and dollar utilization), US Securities and Exchange Commission: https://www.sec.gov/Archives/edgar/data/0001339605/000119312515065622/d848275d10k.htm
Software that runs itself, your way. Start with the production workflow that costs you the most time, and explore whether Stagera fits your process. If knowing what your gear earns is that workflow, start at our equipment tracking software page, then bring a real job to a Stagera walkthrough and evaluate the workflow you want to improve.