How to Price AV Equipment Rentals: Day Rates, Week Rates and Multi-Day Multipliers
How to set AV rental day rates, week rates and multi-day multipliers, with a table of published rental house policies and a worked payback example.
Price AV rental gear by setting a day rate that pays the item back within a target number of rented days, then check that rate against what your local market charges. Sell longer rentals with a published multiplier instead of ad hoc discounts. In the seven published policies we read for this article, a week was most often billed at 3 to 4 day rates, and a Friday to Monday weekend most often billed as one day. Write the rules down, apply them the same way on every quote, and review them at least once a year.
Most rate cards are inherited. Someone copied a competitor’s price list years ago, added new items at whatever felt right, and discounted from there. Here is a way to rebuild it: a cost floor, a market check, a multiplier schedule, and a few rules for the lines that quietly eat margin.
Should You Price From Cost or From the Market?
Both.
Cost-based pricing tells you the lowest rate that makes owning the item worthwhile. Start from the purchase price, estimate billed days per year, add owning costs (repairs, insurance, storage, prep labor), and work out the day rate that pays it back in a period you can live with.
Market-based pricing tells you what customers in your area will pay. Collect published rates and recent quotes from comparable companies and place yourself deliberately above, at, or below them.
Use cost as the floor and the market as the ceiling. If the market rate is below your cost floor, do not own that item. Sub-rent it when a job calls for it.
Is There a Rule of Thumb for Day Rate as a Percentage of Purchase Price?
There are rules of thumb. We could not find an authoritative published standard for AV.
The clearest version we found in writing is a 2017 post on the ControlBooth forum, in a thread about typical sound and lighting rental costs. The poster calls it “a very rough guide”: about 3% of purchase price for a daily rental, 10% for a week, and 30% for a month. The same post adds that long-lived items such as truss may rent for somewhat less, and fragile items such as soft goods, wireless microphones and projectors somewhat more.
Treat that as one forum poster’s rough guide, not a benchmark. The ratios inside it are the useful part: a week at 10% against a day at 3% is roughly a 3.3x week, and a month at 30% is three weeks. Those ratios line up with the published policies below.
Other percentages get repeated in the industry. We could not verify any against a primary source, so we left them out.
What Do Rental Houses Actually Publish for Week and Weekend Rates?
We looked for rental companies that publish their multi-day billing rules and read each page on 2026-11-10. We found seven: three AV or event equipment sources and four camera and production rental houses. This is a small convenience sample, not a survey, and policies change.
| Company (type) | Published week rule | Published weekend rule | Source |
|---|---|---|---|
| ESG Systems (audio, video and lighting rental) | One week “generally costs 3.5 times the daily rate”; a week is “up to 8 days” | Friday pickup with Monday return is a 1 day rental (closed weekends) | esg-1.com |
| Audio Events (audio, video and lighting rental) | No stated rule. Listed week prices are 3.0x the 1 day price on most audio and DJ items, and 2.0x or less on lighting, truss and video items | No stated rule. Listed weekend prices are about 1.5x the 1 day price on audio and DJ items. Other categories list no weekend price | audioeventsonline.com |
| Stanford Event Services (university event equipment) | Week rate, up to 7 consecutive days: multiplier 3.5 | Not stated in the multiplier table | event-services.stanford.edu |
| Precision Camera & Video (camera and video rental) | Weekly rate “covers a full calendar week and is charged at 3x the daily rate” | Weekend rate “charged at 1.5x the daily rate” | precision-camera.com |
| Camera Rentals NYC (cinema camera rental) | More than 4 days up to a week “will be charged as 4 days” | Friday afternoon through Monday morning for the price of a 1 day rental | camerarentalsnyc.com |
| OneStop Rentals (camera, lens, lighting and grip rental) | Charged for three shoot days if you rent gear for 6 to 7 days | Saturday plus Sunday billed as one shoot day | onestop.la |
| dvDepot (camera, audio, lighting and grip rental) | Weekly rentals (7 consecutive days): call for quote | Weekend rentals are a 1 day rate from pickup Friday to drop-off Monday | dvdepot.com |
The Audio Events figures are derived by us from listed prices, not quoted from a policy. Example: a powered speaker at $50.00 for 1 day, $75.00 for a weekend and $150.00 for a week, against an LCD projector at $100.00 for a day and $200.00 for a week.
What the sample shows:
- Week rate. Of the six sources with a published week figure, two land at 3 day rates, two at 3.5, and one at 4. The sixth, Audio Events, varies by category from about 1.5 to 3.
- Weekend. Four of the seven bill a Friday to Monday weekend as one day. Two bill 1.5 day rates. One does not state a weekend rule.
- Month and beyond. Three sources publish longer tiers. Stanford Event Services lists 5.5 for up to 14 consecutive days, 9.0 for up to 31 days and 15.0 for up to 90 days. Camera Rentals NYC charges 3 weeks up to 1 month as 12 days. OneStop Rentals charges 22 to 31 days as 10 shoot days.
How Should You Structure Day, Week and Month Rates?
Pick one multiplier schedule and publish it. A simple version, consistent with the range above:
| Rental length | Billed as |
|---|---|
| 1 day | 1.0 day rate |
| 2 days | 2.0 |
| 3 to 7 days | 3.0 to 4.0 (pick one number) |
| Up to 1 month | 9.0 to 12.0 (pick one number) |
Then decide four things in writing:
- What a “day” is. Precision Camera & Video has daily rentals due back within 24 hours of pickup. OneStop Rentals bills shoot days and excludes pickup and drop-off days.
- What a “week” is. Seven consecutive days is the common definition. ESG Systems allows up to 8.
- How weekends bill. If your counter is closed on weekends, a one day weekend costs you little. If weekends are busy, charge more.
- What happens on late returns. Precision Camera & Video states that weekend, weekly and monthly rates do not apply to late returns, which are charged at the daily rate for each overdue day.
If you are evaluating rental software, bring your multiplier schedule and a real quote, and check that the totals match what you would bill by hand.
What Does the Payback Math Look Like?
This example is hypothetical. Every number is invented for illustration.
Assumptions
- Purchase price: $4,000
- Day rate: $120 (3% of purchase price)
- Billed days per year: 40
- Owning costs (repairs, insurance, storage, prep labor): $800 per year
Payback at full day rate
- Annual rental revenue: 40 x $120 = $4,800
- Net of owning costs: $4,800 minus $800 = $4,000 per year, or $333 per month
- Months to payback: $4,000 / $333 = 12 months
Payback with a 20% average discount
- Effective day rate: $120 x 0.80 = $96
- Annual rental revenue: 40 x $96 = $3,840
- Net of owning costs: $3,840 minus $800 = $3,040 per year, or $253 per month
- Months to payback: $4,000 / $253 = 15.8 months
A 20% discount habit added almost four months to the payback.
What a week multiplier does to per-day revenue
The same item goes out for 7 days:
| Week multiplier | Week price | Revenue per day out | Share of day rate |
|---|---|---|---|
| 3.0x | $360 | $51.43 | 43% |
| 3.5x | $420 | $60.00 | 50% |
| 4.0x | $480 | $68.57 | 57% |
That is a real discount only if the item would have been rented on the other days. Here it is billed 40 days a year, so mostly it sits on the shelf. A 3x week brings in $360 from one prep and one check-in. Three separate one day rentals bring in the same $360 with three preps and three check-ins.
The multiplier costs you when the item is scarce. If a week rental blocks gear you would otherwise turn several times at full day rate, use a higher multiplier on that item or protect peak dates. Your utilization data tells you which items those are.
How Do You Keep Discounts From Eating the Rate Card?
The multiplier schedule is already a discount. A week at 3x is 57% off seven day rates. Stack a 20% “good customer” discount and a rounded-down total on top, and the card no longer means anything.
A few rules that hold up:
- Publish the structural discounts (multi-day, weekend, long term) and apply them automatically.
- Limit discretionary discounts to a few named reasons, such as contracted volume or off-peak dates, each with a cap and an approver.
- Show the discount as a line. List price, discount, net. You can then report on what you gave away.
- Keep labor, delivery and sub-rentals out of equipment discounts. Those lines have cash costs behind them.
Then measure discount given as a share of list price, by customer and by salesperson. It belongs next to the job-level profit view covered in our guide to AV company invoicing.
How Should You Price Sub-Rented Gear?
Sub-rentals (also called cross-rentals) fill inventory gaps with another company’s equipment. Unlike owned gear, they carry a hard cost on every job. A hypothetical example: you pay a supplier $70 for an item and bill it at your list price of $100. Your margin is $30 before pickup, return, prep and the risk you carry while it is in your hands. Give the customer 20% off the whole quote and the line bills at $80, leaving $10. Add a van run and you have paid to supply it.
- Quote from the supplier’s confirmed price for the actual dates, not from memory.
- Set a minimum markup on sub-rented lines and exclude them from blanket discounts.
- Check the supplier’s multi-day rule. If they bill a week at 4 day rates and you bill at 3, your margin shrinks on every long job.
- Charge for collection and return.
When you sub-rent an item often, the payback math above tells you when to buy it. Our guide on scaling an AV rental business covers the buy versus sub-rent decision in more detail.
Where Does a Damage Waiver or Insurance Line Fit?
Your pricing needs a stated position on who pays for loss and damage, and it should appear on the quote, not only in the terms.
The published policies we read handle it differently. Camera Rentals NYC requires minimum insurance or a security deposit, with the insurance deductible held on the customer’s card. Precision Camera & Video accepts a certificate of insurance in place of a deposit, and its rental form asks whether the customer wants a damage waiver. ESG Systems states that lost, damaged or stolen equipment is the renter’s responsibility.
Generally, the options are a certificate of insurance from the customer, a deposit or card hold, a damage waiver sold as a separate line, or a combination. Keep it as its own line so it is not swept into equipment discounts, and state plainly what it does and does not cover. Have your insurance broker and attorney review the wording. This article is not legal or insurance advice.
When Should You Revisit the Rate Card?
Review the whole card once a year. Review individual items sooner when something changes:
- Replacement cost moves. The old day rate is paying back a price that no longer exists.
- Utilization is very high. An item that is out most weeks is underpriced, or you need more of it.
- Utilization is very low. The item is overpriced, obsolete, or should be sold and sub-rented when needed.
- You discount it every time. If nobody pays list, the list price is wrong.
- Supplier or repair costs change. Sub-rental markups and rates on aging gear need to follow.
Tell regular customers before rates change, and keep the old card on file.
Software that runs itself, your way. Start with the production workflow that costs you the most time, and explore whether Stagera fits your process. If that workflow is quoting, see our AV rental software page, then bring a real job to a Stagera walkthrough and evaluate the workflow you want to improve.
Frequently Asked Questions
What is a 3 day week in equipment rental?
It means a customer keeps the gear for up to seven consecutive days and is billed for three day rates. In the published policies we read, week billing mostly ranged from 3 to 4 day rates. A “4 day week” works the same way with four day rates.
How much should a week rate be compared with a day rate?
Among the six sources in our table that publish a week figure, two charge 3 day rates, two charge 3.5, one charges 4, and one price list varies by category. Pick a single multiplier inside that range, publish it, and raise it on items that are regularly booked out.
What percentage of purchase price should a day rate be?
We did not find an authoritative standard. One post in a sound and lighting forum thread gives a very rough guide of about 3% per day, 10% per week and 30% per month, with fragile items higher and long-lived items lower. Use your own payback target and local market rates to set the real number.
How should weekend rentals be billed?
Four of the seven published policies we read bill Friday to Monday as one day, and two bill 1.5 day rates. If you are closed on weekends, a one day weekend costs you little. If weekends are your busiest days, charge more.
Sources
All pages accessed 2026-11-10.
- ESG Systems, Rental Equipment: https://esg-1.com/rental-equipment/
- Audio Events, AV Rentals: https://audioeventsonline.com/AV-Rentals
- Stanford Event Services, Equipment and Services: https://event-services.stanford.edu/equipment-services
- Precision Camera & Video, Rent in Austin: https://www.precision-camera.com/rent-in-austin
- Camera Rentals NYC, Pricing and Insurance: https://camerarentalsnyc.com/pricing_insurance
- OneStop Rentals, Renting Policies: https://onestop.la/?p=3134
- dvDepot, Equipment Rental Guidelines: https://www.dvdepot.com/rental-guidelines
- ControlBooth forum thread, “What are some typical rental costs for sound and lighting gear?” (posts dated March 2017): https://www.controlbooth.com/threads/what-are-some-typical-rental-costs-for-sound-and-lighting-gear.41614/